TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 1119 of 1205
TM 9-2320-387-24-l L 9-5. RADIATOR FRONT MOUNT BRACKET REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) hlaintentice and repair shop equipment: automotive (Appendix B, Item 2) Materials/Parts Three locknuts (Appendix G, Item 121) Manual References TM 9-2320-387-24P Equipment Condition Headlight housing removed (para. 10-18). hlaintenance Level Unit r--~ a. Removal I 1. Remove locknut (21, two washers (31, capscrew (111, washer (31, spacer (101, mount (41, and radiator (1) from front mount bracket (9). Discard locknut (2). 2. Remove two locknuts (121, washers (71, capscrews (61, washers (7), spacers (51, and bracket (9) from front suspension crossmember (8). Discard locknuts (12). [I 1. Install bracket (9) on front suspension crossmember (8) with two spacers (51, washers (71, cap- screws (6), washers (71, and locknuts (12). Tighten locknuts (12) to 90 lb-ft (122 Nom). 2. Instal .l mount (4) and radiator (1) on front mount bracket (9) with washer (3), spacer screw (II), two washers (31, and locknut (2). Tighten locknut (2) to 30 lb-ft (41 N-m). (101, cap- 0’ 1 FOLLOW-ON TASK Install headlight housing (para. 10-18). 9-5