TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 1092 of 1205
TM 9-2320-387-24-l 8-19. INTERMEDIATE STEERING SHAFT REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 11 Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Materials/Parts Two locknuts (Appendix G, Item 141) Manual References TM 9-2320-387-10 TM 9-2320-387-24P Maintenance Level Unit NOTE Ensure front wheels are in straight-ahead position while removing and installing intermediate steering shaft. a. Removal 1. Remove locknut (61, washer (51, capscrew (81, and washer (5) from intermediate steering shaft (4) and steering gear (71. Discard locknut (6). 2. Remove locknut (21,washer (31,capscrew (91,washer (3), and steering shaft (4) from steering column (11. Discard locknut (21. -1 1. Install intermediate steering shaft (4) on steering gear (7) with washer (5), capscrew (81, washer (51, and locknut (61. Tighten locknut (61 to 40-50 lb-ft (54-68 N*m). 2. Install steering sh& (4) on steering column (1) with washer (31,capscrew (91,washer (31,and locknut (2). Tighten locknut (2) to 40-50 lb-ft (54-68 N-ml. 8-54