TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 105 of 1205
TM 9-2320-387-24-l 1 2-20. HOW TO USE THIS TROUBLESHOOTING GUIDE (CONT’D) INFORMATION ABOUT THE QUESTION All warnings and cautions are given next to (or as close as possible to) the arrow pointing to the particular question. Look for the symbol that is in the box for the question in order to locate the particular note. Helpful notes, test procedures, or other information related to the question are provided here. These notes are provided as supporting information only; you don’t usually need them to answer the question. The more skilled you become, the less you’ll have to read these. NOTES, WARNINGS, AND CAUTfONS ARE IN BOLDFACE TYPE. Additional information, notes, and/or suggestions are in normal type so as not to draw too much attention. Any cross references to other manuals will be located in this area. TEST PROCEDURES These are special notes about how to make measurements with the test equipment. Ocassionally. if space is limited on a page, the easiest procedure will be listed with a page reference for the other procedures if you would rather use them. The procedures presume a basic working knowledge of the equipment to be used, but references are included for the less experienced operator. PICTURES The pictures are supposed to make it easier to find what you’re looking for, such as a pin in a connector or a particular wire or component. TYPE OF MEASUREMENT TYPE OF EQUIPMENT %ocedure for performing the measurement using he type of equipment listed above. PICTURES ARE PROVIDED WHEREVER POSSIBLE. 2-41