TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 1047 of 1205
TM9-2320-387-24- 1 8-4. RADIAL TIRE, WHEEL, AND RUBBER RUNFLAT MAINTENANCE (Cont’d) WARNING Never inflate a wheel assembly with the wheel locknuts removed in an attempt to separate inner and outer rim halves. The assembly will separate under pressure, resulting in serious injury or death. 3. Remove outer rim half (1) from tire (6). 4. Remove insert (8) and locknut (10) from outer rim (1). Discard locknut (10). 5. Remove O-ring (9) from insert (8). Discard O-ring (9). 6. Remove O-ring seal (3) from inner rim half (5). Cut O-ring seal (3) in two to make sure it cannot be reused. Discard O-ring seal (3). 7. Remove tire (6) from inner rim half (5). 8. Remove balance weights (4) from rim halves (1) and (51, if present. Discard balance weights (4). 8-9