TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 1031 of 1205
I TM 9-2320-387-24-l 7-17. LEFT PARKING BRAKE CABLE/MOUNTING BRACKET REPLACEMENT (Cont’d) I 1 b. Installation 1 1. 2. 3. 4. 5. 6. 7. 8. NOTE Perform step 1 if parking brake cable mounting bracket was removed. Install parking brake cable mounting bracket (4) and tailpipe hanger (6) on rear body mount (7) with two washers (31, capscrews (51, washers (31, two lockwashers (21, and nuts (1). NOTE Perform step 2 if clamp bracket was removed. Install clamp bracket (35) on support bracket (14l.with washer (321, capscrew (371, lockwasher (341, and nut (33). Slide parking brake cable clamp (23) onto parking bracket cable assembly (221 and install on clamp bracket (35) with lockwasher (24) and capscrew (251. Slide parking brake cable clamp (26) onto parking brake cable assembly (22) and install on clamp bracket (35) with washer (36), capscrew (381, lockwasher (271, and nut (281. Install parking brake cable clamp (12) on parking brake cable assembly (22) and parking brake cable mounting bracket (4) with washer (111, capscrew (131, washer (111, and nut and lockwasher assembly (10). Install parking brake cable sleeve (9) on C-beam (29) and parking brake cable (8) on equalizer bar (30) with clip (31). CAUTION Ensure caliper cable bracket is secure with no signs of looseness and lever is in contact with the caliper cable bracket stop. Damage to equipment and poor performance will result if not aligned properly. Install parking brake cable sleeve (9) on rear caliper cable bracket (15) with cable clip (16). Install brake clevis (20) on rear caliper lever (17) with clevis pin (21), washer (191, and cotter pin (18). 7-50