TM-9-2320-387-24 HMMWV Direct Support & General Support Maintenance Manual Volume 1 Download
Page 1019 of 1205
TM 9-2320-387-24-1 7-14. REAR DUAL SERVICE/PARKING BRAKE PAD MAINTENANCE This task covers: a. Removal c. Installation b. Cleaning and Inspection Manual References TM 9-2320-387-10 TM 9-2320-387-24P Equipment Condition Wheels chocked and parking brake released (TM 9-2320-387-10). General Safety Instructions Ensure brake pads are installed with linings facing rotor. Maintenance Level Unit 7-38 Change 1 a. Removal 1. Remove cotter pin (4), washer (5), and clevis pin (7) from parking brake clevis (6) and lever (3). Discard cotter pin (4). 2. Remove clip (2) and disconnect parking brake cable (8) from caliper cable bracket (1). Discard clip (2). CAUTION Caliper must be supported during removal to prevent damage to brake line. 3. Using crowfoot, remove two capscrews (12), washers (13), clamp (13.1), and pull yoke (14) and caliper (15) away from rotor (10). NOTE Note positioning of brake pad surfaces for installation. 4. Remove two brake pads (9) from adapter (11) and rotor (10). INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 2) Special Tools Crowfoot, 14-mm (Appendix B, Item 141) Materials/Parts Clip (Appendix G, Item 22) Cotter pin (Appendix G, Item 33) Sealing compound (Appendix C, Item 63) Grease (Appendix C, Item 34)