TM-9-2320-387-10 HMMWV Operator Manual Download
Page 97 of 277
37 After Wind- e. Inspect inner surface of e. The bond between shield and windshield glass (spall liner) glass and frame is wipers for complete breaks, delami- separated from glass (Cont’d) nation, scratches, gouges, tape, or frame. Any com- decals, adhesives, or blurred plete break on inner vision. surface of glass. Any digs, gouges, or scratches on inner surface of glass. Any complete break on inner surface of glass. f. Inspect outer surface of f. Any complete windshield glass for a complete break on the outer break. surface of windshield glass. DRIVER 38 After Light NOTE Switches Ensure all switches are in the OFF position. Failure to turn switches to the OFF position when not in use will drain the batteries. Check and ensure all switches are in the OFF position. DRIVER 38.1 Weekly Hand a. Check hand throttle and Throttle mounting bracket for security. Check throttle release button to ensure hand throttle cable operates properly. b. Check hand throttle cable for corrosion, nicks, breaks, or burns. Table 2-2. Preventive Maintenance Checks and Services (Cont’d). Item No. Interval Not Fully Mission Capable If: Location Item to Check/ Service Crewmember Procedure Change 1 2-49 TM 9-2320-387-10