TM-9-2320-387-10 HMMWV Operator Manual Download
Page 71 of 277
TM 9-2320-387-l 0 WARNING Drycleaning solvent is flammable and will not be used near an open flame. A fire extinguisher will be kept nearby when the solvent is used. Use only in well-ventilated places. Failure to do this may result in injury to personnel and/or damage to equipment. Protective gloves, clothing, and/or respiratory equipment must be worn whenever caustic, toxic, or flammable cleaning solutions are used. Failure to do this may result in injury to personnel and/or damage to equipment. CAUTION Do not allow cleaning compounds to come into contact with rubber, leather, vinyl, or canvas materials. Damage to equipment will result. Do not use compressed air when cleaning vehicle interiors. Damage to equipment will result. Do not allow water to enter air cleaner assembly air intake weathercap. Damage to engine will occur. b. Cleaning Instructions for Ballistic Glass. CAUTION . . . (1) Do not clean interior surfaces of ballistic glass by any other means than specified below. Do not use a scraper or other objects with sharp edges that may scratch the inside surfaces of ballistic glass. Do not apply stickers, labels, solvents, abrasive materials, or cleaners to ballistic glass. Remove dust and loose abrasive particles using clean, filtered air at 20 psi (138 kPa) maximum. cloth, (2) Wash with mild detergent and warm water. Dry using a clean, soft, lint-free (3) Remove stubborn marks and stains using a clean, soft, lint-free cloth and equal parts of isopropyl alcohol or ethanol and water. (4) Repeat step 2. NOTE Clean windshield wipers of debris on a regular basis to ensure proper vision. c. Cleaning Materials. Detailed descriptions of specific cleaning compounds, cleaning solvents, drycleaning solutions, and corrosion-removing compounds are found in TM 9-247. d. General Guidelines. Table 2-1 provides a general guide of cleaning materials used in removing contaminants from various parts of the vehicle. 2-25