TM-9-2320-387-10 HMMWV Operator Manual Download
Page 199 of 277
TM 9-2320-387-10 3-16 Change 1 c. Air Filter Element Cleaning. CAUTION Do not strike ends of filter element on hard surface, or damage to filter element may result. (1) Hold filter element (1) with open end facing ground. (2) Gently tap completely around filter element (1) with hand to free trapped dirt. d. Filter Element Installation. CAUTION The turbocharged engine requires a 420CFM filter element. Use of any other filter element will damage equipment. (1) Remove clamp (2) and cover (3) from air cleaner assembly (5). (2) Position filter element (1) into air cleaner assembly (5) and secure element (1) to stud (6) with nut and washer assembly (4). CAUTION When clamp is secured to end of air cleaner, ensure clamp screw is between three and six o’clock positions to prevent damaging hood when hood is closed. NOTE Perform step 3.1 for vehicles with new over-center clamp configuration only. (3) Install cover (3) and clamp (2) on end of air cleaner assembly (5) and tighten clamp screw (7). (3.1) Install cover (3) on air cleaner assembly (5) and secure with over-center clamp (2). (4) Lower and secure hood (para. 3-9). 3-15. AIR CLEANER SERVICING (EMERGENCY PROCEDURE) (Cont’d) 1