TM-9-2320-387-10 HMMWV Operator Manual Download

Page 178 of 277

TM 9-2320-387-10 2-130 Change 1 g. Installation of Soft Top Doors. (1) Apply a small amount of seasonal grade OE/HDO oil to hinge pins (6), and install door (1) by inserting hinge pins (6) into hinge brackets (5). (2) Install door holding check strap (3) on mounting plate (2). CAUTION If door is jammed, do not force shut. Excessive force may damage door. (3) Close door (1). It may be necessary to adjust door hinges (5) or door latch striker (4) to achieve a tight seal. If adjustment is necessary, notify unit maintenance. NOTE When lowering soft top door window, always fold window to inside of vehicle and secure between door and door frame crossmember. 2-54. REMOVAL AND INSTALLATION OF TWO-MAN CREW AREA SOFT TOP ENCLOSURE (Cont’d) 2-55. REMOVAL AND INSTALLATION OF S250 SHELTER CARRIER REAR SUSPENSION TIEDOWN KIT CAUTION The M1113 shelter carriers are specifically designed to be operated with the S250 shelter installed. The vehicles can be driven safely without the shelter installed, or equivalent payload of 1,500 lb (681 kg), for short distances (e.g., to and from maintenance or from the rail head when being delivered), but this should not be done often or for long distances. Driving for long distances without the shelter installed, or equivalent payload of 1,500 lb (681 kg) evenly distributed in center of cargo area, will cause damage to equipment. 1 5 3 2 4 6