TM-9-2320-387-10 HMMWV Operator Manual Download
Page 172 of 277
TM 9-2320-387-10 2-124 Change 1 .WARNING. Do not operate vehicle without windshield assembly positioned upright and the B-pillar securely attached. Operation of vehicle without these structures in place may result in injury to personnel and damage to equipment. NOTE Before lowering windshield on vehicles equipped with retention bracket, the windshield retention bracket must be removed. Notify unit maintenance. a. Lowering Windshield Assembly. (1) Remove two hitch pins (3) from inside hinge pins (4) and remove hinge pins (4). (2) Lower windshield assembly (5) to hood and secure windshield assembly (5) to four footman loops (2) with two straps (1). b. Raising Windshield Assembly. (1) Remove two straps (1) from four footman loops (2) securing windshield assembly (5) to hood. (2) Raise windshield assembly (5). NOTE Notify unit maintenance to install windshield retention bracket. (3) Secure windshield assembly (5) with two inside hinge pins (4) and hitch pins (3). 2-51. GENERAL a. This section provides operating instructions for components found on M1113 shelter carriers. b. Refer to para. 2-2a for stowage location of fire extinguisher on S250 shelter carrier. Refer to para. 2-29 for operation of fire extinguisher. 2-53. WINDSHIELD ASSEMBLY OPERATION Section V. S250 SHELTER CARRIER OPERATION 2-52. S250 SHELTER CARRIER OPERATION REFERENCE INDEX 2-53. Windshield Assembly Operation 2-124 2-54. Removal and Installation of Two-Man Crew Area 2-126 Soft Top Enclosure 2-55. Removal and Installation of S250 Shelter Carrier 2-130 Rear Suspension Tiedown Kit REF. TITLE PAGE PARA. NO.