TM-9-2320-387-10 HMMWV Operator Manual Download
Page 168 of 277
TM 9-2320-387-10 2-120 (6) Clean and stow intake and exhaust assembly components. (7) If fording operation was through salt water, wash and wipe off all salt deposits as soon as possible. NOTE To prevent parking brake linkage from binding, lithium grease should be used after operating in water. (8) Clean mud, grit, and debris from brake linkage. Apply lithium grease (appendix D, item 14), and move linkage back and forth to work into joints. (9) After deep water fording operation, vehicle must be lubricated and serviced by unit maintenance as soon as possible. 2-48. DEEP WATER FORDING (M1113) OPERATION (Cont’d) BRAKE LINKAGE