TM-9-2320-387-10 HMMWV Operator Manual Download
Page 102 of 277
44 Weekly Body c. Check cargo shell door (Cont’d) for alignment as follows: (1) Insert a piece of paper between the door seal and door opening. (2) With door closed, seal should offer resistance to pulling out paper. If door seal does not offer resistance, adjustment is required. d. Check crew compartment armor for security of mounting. e. Check armor for loose or missing fasteners. Notify unit maintenance if any are found. WARNING Unauthorized welds and/or drilling of vehicle armor will degrade armor protec- tion capabilities and could result in severe injury to personnel. f. Inspect underbody armor f. Vehicle missing for missing retainer plates retainer plates or or screws. screws. g. Inspect underbody plates g. Deformation is for any deformation (buckling, visually detected. collapsing, or bending). h. Check operation of C- h. C-partition door partition door and ensure it will not close and will lock in all three positions. lock in all three posi- tions, or inoperative. Table 2-2. Preventive Maintenance Checks and Services (Cont’d). Item No. Interval Not Fully Mission Capable If: Location Item to Check/ Service Crewmember Procedure TM 9-2320-387-10 2-54 Change 1