TM-9-2320-362-14&P HMMWV Technical Manual Electrical Environmental System (EES) Download
Page 90 of 353
TM 9-2320-362-14&P 3-27. CABLE ASSEMBLY REPAIR NOTE For basic cable assembly repairs, see TM 9-2320-280-20. 3-28. WIRE NO. 798 REPLACEMENT This task covers: a: Removal b. Installation INITIAL SETUP: Tools Equipment Condition General mechanic’s tool kit: ● Hood raised and secured automotive (Item 1, Section III, (TM 9-2320-280-10) Appendix B) ● Battery ground cable disconnected Material/Parts (TM 9-2320-280-20) Tie-straps P/N MS3367-2-0 Manual References TM 9-2320-280-10 TM 9-2320-280-20 1. 2. 3. 4. 5. 6. 7. 8. 9. 3-60 Unlatch two flexible latches (13) from keepers (11) on engine access cover holddown brackets (10). Unlatch two engine access cover holddown latches (12) from engine access cover holddown strikes (19). Turn two ring studs (7) and pull engine access cover (6) out until end of safety lanyard (14) is reached. Disconnect cable assembly W66 (16) from connector on tach/hourmeter box (5). Unhook safety lanyard (14) from safety tab (1). Remove engine access cover (6). Remove tie-straps (4) that attach wire no. 798 (8) to wiring harness (3). Remove wire no. 798 (8) from wire no. 798 (9) (on compressor). Remove screw (15) that attaches loop clamp (18), wire no. 798 (8), wire no. 58 (17), and safety tab (1) from engine block (2). Remove wire no. 798 (8).