TM-9-2320-362-14&P HMMWV Technical Manual Electrical Environmental System (EES) Download
Page 78 of 353
TM 9-2320-362-14&P 3-25. CABLE ASSEMBLY W64 REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Tools Manual Reference General mechanic’s tool kit: TM 9-2320-280-20 automotive (Item 1, Section III, Appendix B) 1. Disconnect cable assembly W64 (1) from connector 12J1 (11) on tach/ hourmeter box (2). 2. Unlatch and open storage box cover (4). 3. Remove four screws (6) and two washers (7) that secures front floorboard (8) to transmission tunnel (9). 4. Lift front floorboard (8) and pull cable assembly W64 (1) through storage box (5) and front floorboard (8). 5. Disconnect cable assembly W64 (1) from connector and remove from truck. 10J2 (3) on shelter I b. Installation I 1. Connect cable assembly W64 (1) to connector 10J2 (3) on shelter. 2. Feed cable assembly W64 (1) through holes (10) in front floor- board (8) and storage box (5). 3. Connect cable assembly W64 (1) to connector 12J1 (11) on tach/ hourmeter box (2). 4. Secure front floorboard (8) to transmission tunnel (9) with two washers (7) and four screws (6). 5. Close and latch storage box cover (4). 3-48