TM-9-2320-362-14&P HMMWV Technical Manual Electrical Environmental System (EES) Download
Page 72 of 353
TM 9-2320-362-14&P 3-22. STORAGE BOX REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Tools Equipment Condition General mechanic’s tool kit: Cab rear panel is rolled upward automotive (Item 1, Section III, (TM 9-2320-280-10) Appendix B) Manual Reference TM 9-2320-280-10 1. Unlatch and open storage box cover (5). 2. Disconnect cable assembly W64 (4) from connector 10J2 (1) and cable assembly CX-4723/VRC (3) from connector 10J1 (2). 3. Remove two screws (7) and washers (8) that attach storage box (6) to front floorboard (9). 4. Lift storage box (6) and pull cable assembly W64 (4) and cable assembly CX-4723/VRC (3) through cutout (10). Remove storage box (6). b. Installation 1. Feed cable assembly W64 (4) and cable assembly CX-4723/VRC (3) through cutout (10) in storage box (6). 2, Install storage box (6) to front floorboard (9) and secure with two washers (8) and screws (7). 3. Connect cable assembly W64 (4) to connector 10J2 (1) and cable assembly CX-4723/VRC (3) to connector 10J1 (2). 4. Close and latch storage box cover (5). 3-42