TM-9-2320-362-14&P HMMWV Technical Manual Electrical Environmental System (EES) Download
Page 60 of 353
TM 9-2320-362-14&P 3-16. HAND THROTTLE CABLE ADJUSTMENT This task covers: a. Hand Throttle Cable Adjustment INITIAL SETUP: Tools Manual Reference General mechanic’s tool kit: TM 9-2320-280-10 automotive (Item 1, Section III, Appendix B) a. Hand Throttle Cable Adjustment 1. 2. 3. 4. 5. Start engine Note RPM and Hand NOTE Normal idle is 650 RPM (± 25 RPM). (TM 9-2320-280-10) and let engine come to idle. shut engine off (TM 9-2320-280-10). NOTE throttle cable should be positioned with no tension on cable. Loosen nuts (1) and (3) and move hand throttle cable (2) until desired position is obtained. Tighten nuts (1) and (3) to secure hand throttle cable (2) in correct position. Start engine (TM 9-2320-280-10) and let engine come to idle. Idle speed and operation of hand throttle cable (2) should be correct. If incorrect, repeat steps 2 thru 4 or refer to table 3-2, Troubleshooting malfunction 1. 3-30