TM-9-2320-362-14&P HMMWV Technical Manual Electrical Environmental System (EES) Download
Page 58 of 353
TM 9-2320-362-14&P 3-15. HAND THROTTLE CABLE REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Tools Manual Reference General mechanic’s tool kit: TM 9-2320-280-10 automotive (Item 1, Section III, Equipment Condition Appendix B) Engine shut off (TM 9-2320-280-10) 1. Loosen nut (4) and star washer (5) on hand throttle cable (2) and detach hand throttle cable (2) from bracket (3). 2. Loosen nut (7) and washers (6) on hand throttle cable (2) and detach hand throttle cable (2) from bracket (l). 3. Remove hitch pin (10) and washer (11). Disconnect clevis (8) from accelerator rod (9) and remove hand throttle cable (2). b. Installation NOTE Hand throttle cable should be positioned with no tension on cable. 1. Install clevis (8) to accelerator rod (9) and secure with washer (11) and hitch pin (10). 2. Install hand throttle cable (2) to bracket (1) and secure with washers (6) and nut (7). 3. Install hand throttle cable (2) to bracket (3) and secure with star washer (5) and nut (4). 3-28