TM-9-2320-362-14&P HMMWV Technical Manual Electrical Environmental System (EES) Download
Page 27 of 353
TM 9-2320-362-14&P 2-5. OPERATOR PMCS (Cont’d) NOTE PMCS for designated intervals are performed under usual operating conditions. PMCS must be performed more frequently when operating under unusual conditions. (3) Item To Be Inspected. Lists the system, common name, or location of item to be inspected. (4) Procedures. Provides instructions for inspecting, servicing, or cleaning, and in some cases, having item repaired at a higher level. (5) Equipment Is Not Ready/Available. Tells when and why equipment cannot be used. If vehicle is not able to perform the mission, equipment will be reported as not ready/available. Refer to DA Pam 738-750. c. Procedures. (1) Refer to TM 9-232-280-10 for general vehicle PMCS, if necessary. (2) Use DA Form 2404 (DA Pam 738-750) and report malfunctions to unit maintenance at once. (3) Tools included with vehicle are to be used during PMCS. Wiping rags are needed to remove dirt or grease. NOTE Dirt, grease, oil, and debris may cover up a serious problem. Clean as you check and follow precautions. 2-5