TM-9-2320-362-14&P HMMWV Technical Manual Electrical Environmental System (EES) Download
Page 232 of 353
TM 9-2320-362-14&P b. Fabrication Instructions. Bulk materials required to manufacture items are listed in the bulk material functional group of this RPSTL. Part numbers for bulk materials are also referenced in the description column of the line item entry for the item to be manufactured/fabricated. Detailed fabrication instructions for items source codes to be manufactured or fabricated are found in this manual. c. Index Numbers. Items which have the word BULK in the figure column will have an index number shown in the item number column. This index number is a cross-reference between the National Stock Number/Part Number Index and the bulk material list in section II. D-6. How to Locate Repair Parts a. When National Stock Number or Part Number is Not Known: (1) First. Using the Table of Contents, determine the assembly group or subassembly group to which the item belongs. This is necessary since figures are prepared for assembly groups and subassembly groups, and listings are divided into the same groups. (2) Second. Find the figure covering the assembly group or subassembly group to which the item belongs. (3) Third. Identify the item on the figure and use the Figure and Item Number Index to find the NSN. b. When National Stock Number or Part Number is Known: (1) First. Using the National Stock Number Index and the Part Number Index, find the pertinent NSN or part number. The NSN index is in NIIN sequence [see 4.a.(1)]. The part numbers in the Part Number Index are listed in ascending alphanumeric sequence [see 4.b.). Both indexes cross-reference you to the illustration/figure and item number of the item you are looking for. (2) Second. Turn to the figure and item number, is the one you’re looking for, then locate the item number List for the figure. D-8 (D-9 blank) verify that the item in the Repair Parts