Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-362-14&P HMMWV Technical Manual Electrical Environmental System (EES) Download

Page 157 of 353

TM 9-2320-362-14&P 4-18. EES KIT INSTALLATION (Cont’d) 12. 13. 14. 15. 16. CAUTION When cutting insulation, do not cut through en- gine access cover or equipment’s effectiveness may be degraded. From underside of engine access cover (1), insert insulation template (7) into holes (4) and (5). Secure template (7) to engine access cover (1) with two screws (8), washers (3), and wing nuts (2). Cut out insulation (6) around outline of insulation template (7). Trim cut edges of insulation as needed. WARNING When drilling, be sure to wear goggles for eye protection or injury to personnel may occur. Remove two screws (8), washers (3), and wing nuts (2). Remove insulation template (7). Drilling from front side of engine access cover (l), enlarge hole (5) using 1 5/8-inch hole saw. 4-45