TM-9-2320-362-14&P HMMWV Technical Manual Electrical Environmental System (EES) Download
Page 154 of 353
TM 9-2320-362-14&P 4-18. EES KIT INSTALLATION (Cont’d) 2. 3. 4. 5. 6. NOTE After drilling holes, touch-up exposed surfaces with paint to prevent corrosion. Remove two screws (3) securing retaining rod (2) to cargo floor (4) and remove retaining rod (2) from insulation blanket (10). Retain screws (3) and retaining rod (2). Remove one screw (12) and one retaining clip (11) holding insulation retainer (5) to transmission tunnel (16). Retain screw (12) and retaining clip (11). Remove one screw (1) and one bolt (9) securing insulation retainer (5) to transmission tunnel (16) and remove insulation retainer (5). Retain screw (1) and bolt (9). Remove two screws (7) and one retainer (6) securing insulation blanket (10) to floor (8). Retain screws (7) and retainer (6). Lift up right front cowl insulation (15) and remove two screws (14) and one retainer (13) securing insulation blanket (10) to floor (8) and remove insulation blanket (10). Retain screws (14) and retainer (13). 4-42