TM-9-2320-362-14&P HMMWV Technical Manual Electrical Environmental System (EES) Download

TM 9-2320-362-14&P Antiseize compound, conductive (Appendix C, Item 1) Cable assembly W66 P/N C5136366 One connector P/N MS27144-1 One loop clamp P/N MS21333-123 One safety tab P/N C5136342 One metric hex head cap screw P/N B18231A10020NF One wire no. 798 P/N C5136367 Six adapters P/N 8741492 Six 3-way connectors P/N MS27147-1 Solder, tin alloy (Appendix C, Item 8) Tie-straps (as required) P/N MS3367-2-0 Two connectors P/N MS27142-2 Materials/Parts (Cont’d) Materials/Parts (Cent’d) dd. Freon lines installation ff. Hand throttle cable (Cont’d) ● One female quick disconnect (A/C discharge) P/N C5136152-5 (.500) ● One “O” ring (A/C discharge) P/N 12341984-4 ● One “O” ring (A/C suction) P/N 12341984-2 ● Two swaging sleeves P/N MS51844-62 ● Tie-straps (as required) P/N MS3367-1-9 ● Tie-straps (as required) P/N MS3367-3-0 ● Tie-straps (as required) P/N MS3367-5-9 ● Tape, pressure sensitive (as required) (Appendix C, Item 9) ee. Cable assembly W66 installation ● ● ● ● ● ● ● ● ff. Hand throttle cable installation ● One hand throttle cable P/N C5136358 ● One hand throttle bracket P/N C5136357 installation (Cont’d) ● One throttle cable end bracket P/N C5136359 •Three self-locking nuts P/N MS17830-4C gg. Storage box and cable assembly W64 installation ● One storage box P/N C5136310 ● One cable assembly W64 P/N C5136365 hh. M16 rifle mount installation ● Eight washers P/NMS27183-10 (.281 I.D.) ● Four capscrews P/N MS90728-8 (.250-20UNC-2Ax1.000 LG) ● Four machine screws P/N MS51957-47 ● Four self-locking nuts P/N MS51943-31 (.250-20UNC-3B) ● Four self-locking nuts P/N NAS1022-N08 (.164-32UNC-3B) ● Rag (Appendix C, Item 5) ● Six nuts P/N MS51943-33 (.3125-18) ● Six bolts P/N MS90725-33 (.312-18UNC-2AX.875 LG) ● Twelve washers P/N 2436162 ● Two clamp brackets P/N 12340157 ● Two mounting clamps P/N 12340487 Two rifle supports P/N 12340142 ii. Ladder mount installation ● One ladder retaining bracket P/N C5136373 ● Three screws P/N MS51957-81 (.250-20UNC-2Ax.750 LG) ● Three self-locking nuts P/N MS51943-31 (.250-20UNC-3B) ● Six washers P/N MS15795-810 (.281 I.D.) ● Two self-locking nuts P/N MS21044C3 (.190-32UNJF-3B) ● Two screws P/N MS51960-66 4-39