TM-9-2320-362-14&P HMMWV Technical Manual Electrical Environmental System (EES) Download
Page 128 of 353
TM 9-2320-362-14&P 4-10. POWER INTERFACE BOX TERMINAL REPLACEMENT (Cont’d) g. Terminal 11E4 Removal 1. Remove two self-locking nuts (1) and washers (2) from terminal cover (3). Remove terminal cover (3) from power interface box (17). Discard self-locking nut (1). 2. Remove nut (4), lockwasher (5), and washer (6) from terminal 11E4 (8). Remove power cable W67 (7) from terminal 11E4 (8). 3. Remove sixteen screws (15), cover (14), and gasket (13) from power interface box (17). Discard gasket (13). 4. Remove nut (12), lockwasher (11), and washer bar (16) to terminal 11E4 (8). 5. Remove nut (9) from inside terminal 11E4 (8) 11E4 (8). h. Terminal 11E4 Installation 1. 2. 3. 4. 5. 6. (10) that secure bus and remove terminal Apply sealant to area of terminal that contacts power interface box (17). Install terminal 11E4 (8) into power interface box (17) and secure with nut (9). Secure bus bar (16) to terminal 11E4 (8) with washer (10), lockwasher (11), and nut (12). Install gasket (13) and cover (14) on power interface box (17) and secure with sixteen screws (15). Install power cable W67 (7) to terminal 11E4 (8). Secure with washer (6), lockwasher (5), and nut (4). Install terminal cover (3) to power interface box (17) and secure with two washers (2) and self-locking nuts (1). 4-16