TM-9-2320-362-14&P HMMWV Technical Manual Electrical Environmental System (EES) Download

Page 124 of 353

TM 9-2320-362-14&P 4-10. POWER INTERFACE BOX TERMINAL REPLACEMENT This task covers: a. Terminal 11E1 Removal g. Terminal 11E4 Removal b. Terminal llE1 Installation h. Terminal 11E4 Installation c. Terminal 11E2 Removal i. Terminal 11E5 Removal d. Terminal 11E2 Installation j. Terminal 11E5 Installation e. Terminal 11E3 Removal f. Terminal 11E3 Installation INITIAL SETUP: Tools Materials/Parts General mechanic’s tool kit: Two self-locking nuts automotive (Item 1, Section III, P/N MS21044C3 Appendix B) Equipment Condition Materials/Parts Power interface box removed One gasket P/N C5136331 (para. 3-30a) Sealant, exterior (Appendix C, Item 6) a. Terminal llE1 Removal 1. Remove sixteen screws (4), cover (3) , and gasket (2) from power interface box (1). Discard gasket (2). 2. Remove nut (10), lockwasher (9), and washer (8) that secure bus bar (6) to terminal 11E1 (5). 3. Remove nut (7) from inside terminal 11E1 (5). Remove terminal 11E1 (5). b. Terminal 11E1 Installation 1. Apply sealant to area of terminal that contacts power interface box (1). 2. Install terminal 11E1 (5) into power interface box (1) and secure with nut (7). 3. Secure bus bar (6) to terminal 11E1 (5) with washer (8), lockwasher (9), and nut (10). 4. Install gasket (2) and cover (3) on power interface box (1) and secure with sixteen screws (4). 4-12