TM-9-2320-362-14&P HMMWV Technical Manual Electrical Environmental System (EES) Download

Page 122 of 353

TM 9-2320-362-14&P 4-9. INDICATOR LIGHT AND WIRE ASSEMBLIES REPAIR (Cont’d) 1. 2. 3. 4. 5. 6. 7. 8. 9. Solder wire assembly leads (13) and/or (12) to back of indicator light (3). Install indicator light (3) into power interface box (4) and secure with internal tooth washer (5) and nut (6). Install incandescent lamp (2) and light lens (1). Place wire assembly lead (13) onto bus bar (10) and terminal 11E5 (26) and secure with washer (14), lockwasher (15), and nut (16). Install circuit breaker (20) into power interface box (4). Install boot (29) and guard (28) onto power interface box (4) and secure with four washers (30), lockwashers (31), and screws (32). Secure bus bar (24) to terminal 11E4 (27) with washer (17), lockwasher (18), and nut (19). Secure wire assembly lead (12), bus bar (25), and bus bar (21) with washers (22), screw (11), and nut (23). Install gasket (7) and cover (8) on power interface box (4) and secure with sixteen screws (9). 4-10