TM-9-2320-362-14&P HMMWV Technical Manual Electrical Environmental System (EES) Download
Page 113 of 353
4-5. 4-4. TM 9-2320-362-14&P CHAPTER 4. DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE Section I. REPAIR PARTS; SPECIAL TOOLS; TEST, MEASUREMENT, AND DIAGNOSTIC EQUIPMENT (TMDE); AND SUPPORT EQUIPMENT 4-1. COMMON TOOLS AND EQUIPMENT For authorized common tools and equipment, refer to the Modified Table of Organization and Equipment (MTOE) applicable to your unit. 4-2. SPECIAL TOOLS AND SUPPORT EQUIPMENT Special tools and support equipment are listed and illustrated in Appendix D of this manual. 4-3. TEST, MEASUREMENT, AND DIAGNOSTIC EQUIPMENT (TMDE) Calibrate all measuring and test equipment used to determine equipment conformance with TB 43-180. Repair parts are listed and illustrated in Appendix D of this manual. Section II. DIRECT SUPPORT TROUBLESHOOTING a. Information in this section is for use by support maintenance personnel in conjunction with, and as a supplement to, troubleshooting procedures in TM 9-2320-280-20 and TM 9-2320-280-34. b. Direct support troubleshooting, table 4-1, contains instructions that will help you diagnose and correct malfunctions of the components of the EES kit. c. The troubleshooting procedures in this section cannot give all the answers or correct all malfunctions encountered. However, these procedures are an organized step-by-step study of a problem that directs tests and inspections toward the source of a problem and successful correction. d. Do the easiest things first. Most troubles are easily corrected. Never overlook the chance that the problem could be of simple origin. e. Doublecheck before disassembly. The source of most problems can be traced to more than one part in a system. f. Before correcting a problem, diagnose the cause of the problem. Do not allow the same failure to occur again. 4-1