TM-9-2320-362-14&P HMMWV Technical Manual Electrical Environmental System (EES) Download
Page 111 of 353
TM 9-2320-362-14&P 3-34. 200 AMP ALTERNATOR GROUND STRAP REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Tools Manual Reference General mechanic’s tool kit: TM 9-2320-280-10 automotive (Item 1, Section III, TM 9-2320-280-20 Appendix B) Equipment Condition Materials/Parts • Hood raised and secured Copper shield (TM 9-2320-28-10) (Appendix C, Item 2) ● Battery ground cable disconnected (TM 9-2320-280-20) 1. Remove nut (1) and lockwasher (2) from ground stud (7). Retain lock- washer (2) for installation. 2. Remove bolt (8) from upper hole on mounting bracket (6) and remove ground strap (4). NOTE Ensure terminal is clean before connection is made 1. Apply copper shield sparingly to bolt surface of ground strap (4). 2. Insert bolt (8) through hole in ground strap (4). 3. Install bolt (8) and ground strap (4) to upper hole on mounting bracket (6). Tighten to 48 lb-ft (65 Nm). 4. Install ground strap (4) and lead 3B (3) to ground stud (7) and secure with lockwasher (2) and nut (1). Tighten nut (1) to 96-144 lb-in. (11-16 N.m). FOLLOW-ON TASKS: Connect battery ground cable (TM 9-2320-280-20). Lower and secure hood (TM 9-2320-280-10). 3-81