TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 994 of 1258
TM 9-2320-280-34 19-3. DIFFERENTIAL REPAIR (Cont'd) 3. Remove locknut (3), two O-ring seals (7), output flange (6), and output shaft seal (5) from output shaft (4). Discard O-ring seals (7), output shaft seal (5), and locknut (3). 4. Repeat steps 1 through 3 for opposite side. 5. Install axle holding fixture adapters on housing (1) with four capscrews (10). Place housing (1) in holding stand. 6. Position housing (1) so differential cover (8) faces up. Remove twelve capscrews (9) and cover (8) from housing (1). 19-3