TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 991 of 1258
TM 9-2320-280-34 18-4. TRANSFER CASE REPAIR (Model 242) (Cont'd) 43. Install front output yoke (25) on shaft (23) with lockwasher seal (24) and nut (21). Tighten nut (21) to 90-130 lb-ft (122-176 N.m). 44. Install driven gear (30), O-ring (29), and pinion adapter (28) in rear retainer (12) with clamp (27) and capscrew (26). Tighten capscrew (26) to 12-15 lb-in. (1.4-1.7 N.m). 45. Move shift range lever (22) to make sure transfer shifts into four detent positions. May have to turn shafts to obtain full detent engagement. FOLLOW-ON TASK: Install transfer case (para. 8-3). 18-51