TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 959 of 1258
TM 9-2320-280-34 18 - 3. TRANSFER CASE REPAIR ) (Model 218) (Cont’d) 18. Assemble mode selector fork (14), mode selector fork spring (18), and mode selector fork bracket (16). 19. Ensuring that three plastic pads (13) are in place on mode selector fork (14), install mode selector fork (14) in groove in clutch sleeve (19). 20. Install mode selector fork (14), mode fork spring (18), mode selector fork bracket (16), clutch sleeve (19), and shift rail spring (15) on shift rail (17). 21. Install mainshaft thrust washer (22) on mainshaft (23). 22. Apply petrolatum to surface of mainshaft (23) to hold needle bearings (21) in place. 23. Assemble forty-one needle bearings (21) on mainshaft (23). Install spacer sleeve (24) on mainshaft (23). 24. Assembly forty-one needle bearings (21) on mainshaft (23). Install spacer ring (20) on mainshaft (23). 25. Install snapring (27) in slot closest to center on side gear (28). 26. Install drive gear (26) and side gear clutch (25) on side gear (28). 18-19