TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 898 of 1258
TM 9-2320-280-34 17-114 Change 1 17-25. INTERMEDIATE CLUTCH ASSEMBLY AND FRONT BAND REPAIR (4L80-E) INITIAL SETUP: Applicable Models M997A2, M1025A2, M1035A2, M1043A2, M1045A2, M1097A2, M1123 Manual References TM 9-2320-280-24P Equipment Condition Transmission disassembled into subassemblies (para. 17-14). Maintenance Level General support This task covers: Inspection NOTE • Intermediate clutch plates, backing plate, and front band were removed during disassembly. Inspect clutch plates only if they will be reused. • Work area should be well-ventilated, clean, and free from blowing dirt and dust. • Replaced damaged plates as a set. • Wave plate is used on 1997-1998 transmissions only. 1. Inspect wave plate (4.1), four clutch plates (3), and clutch plate assemblies (4) for cracks, wear, evidence of overheating and scoring. 2. Inspect backing plate (1) for cracks, breaks, scoring, and evidence of overheating. Replace if damaged. 3. Inspect front band (2) for cracks, loose or damaged anchor or pin ends, and worn or burned composition material. Replace if damaged. Inspection 1995 - 1996 1997 - 1998