TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 853 of 1258
TM 9-2320-280-34 17-14. TRANSMISSION DISASSEMBLY INTO SUBASSEMBLIES (4L80-E) (Cont’d) l. Turbine Shaft and Overdrive Carrier Assembly 1. Lift turbine shaft (1) and remove overrun clutch housing assembly (10) from transmission case (7). CAUTION Correct torque for installed fourth clutch bolt should be 133 lb- in. (15 N·m). If not tightened to minimum torque, check case for cracks and damaged threads. Replace case if damaged. 2. Check fourth clutch bolt (12) torque for a minimum of 133 lb-in. (15 N·m). 3. Remove bolt (12) from fourth clutch housing (11) with torx adapter. Discard bolt (12). 4. Remove fourth clutch housing (11). 17-73