TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 846 of 1258
TM 9-2320-280-34 17-66.2 Change 1 17-14. TRANSMISSION DISASSEMBLY INTO SUBASSEMBLIES (4L80-E) (Cont’d) 1. Disconnect wiring harness (6) from PWM solenoid (7), pressure control solenoid (8), transmission fluid pressure switch (2), 2-3 shift solenoid (5), 1-2 shift solenoid (4), and connector (3). NOTE Capscrews are different lengths. Record location of each capscrew for installation. 2. Remove two capscrews (9), clips (10), and harness (6) from control valve assembly (12). 3. Remove six capscrews (13) and transmission fluid pressure switch (14) from control valve assembly (12). 4. Remove capscrew (16) and spring and roller assembly (15) from control valve assembly (12). 5. Remove lube pipe (11) from control valve assembly (12). 6. Remove sixteen capscrews (19) and control valve body assembly (12) from transmission (1). CAUTION Do not use magnets or any magnetized tools to remove checkballs. Some checkballs are metal, and if magnetized, will pick up debris from oil and cause malfunction of transmission. NOTE Record locations of checkballs for assembly. 7. Remove eight checkballs (17) from transmission (1). 8. Remove screen (18) from transmission (1). e.1. Control Valve Assembly (1997-1998)