TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 839 of 1258
TM 9-2320-280-34 17-13. TRANSMISSION ASSEMBLY FROM SUBASSEMBLIES (3L80) (Cont’d) o. Governor 1. Install governor (23) into case (13). 2. Install cover gasket (20) and governor cover (21) on case (13) with four capscrews (22). Tighten capscrews (22) to 16-20 lb-ft (22-27 N·m). p. Oil Filter 1. Install O-ring seal (24) on end of intake pipe (25) marked "case". Assemble end of intake pipe (25) marked "filter" into oil filter (18). 2. Install oil filter (18) and intake pipe (25) into case (13). 3. Install filter spacer (19) between control valve (6) and oil filter (18) with shoulder bolt (26). Tighten shoulder bolt (26) to 11 lb-ft (15 N·m). q. Oil Pan 1. Clean oil pan (16) in accordance with para. 2-13. 2. Install oil pan gasket (17) and oil pan (16) on case (13) with thirteen capscrews (15). Tighten capscrews (15) to 11-13 lb-ft (15-18 N·m). 17-61