TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 831 of 1258
TM 9-230-280-34 17-13. TRANSMISSION ASSEMBLY FROM SUBASSEMBLIES (3LB80) (Cont’d) h. Forward Clutch and Turbine Shaft 1. Install forward clutch hub thrust washer (13) on forward clutch housing (12). Retain thrust washer (13) with petrolatum. NOTE When installing forward clutch and turbine shaft, it may be necessary to rotate and shake forward clutch and turbine shaft assembly to align direct clutch plates with forward clutch housing. 2. Install forward clutch (12) and turbine shaft (11) into direct clutch (14). CAUTION The top of the forward clutch housing must be 1-1/4 in. (31.7 mm) from oil pump mounting surface or transmission damage will result. 3. Measure the distance from top of forward clutch housing (12) to oil pump mounting surface (15) to determine if forward clutch (12) is fully engaged with direct clutch (14). 17-53