TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 830 of 1258
1. Remove snapring (1), direct clutch backing plate (2), six composition clutch plates (3), and steel clutch plates (9) from direct clutch housing (4). 2. Using intermediate clutch alignment tool, align intermediate clutches (6). Apply air pressure through center support bolt (10) to hold clutch plates (6) in place. Remove alignment tool and install direct clutch housing (4) into case (8). 3. Remove air pressure and ensure that direct clutch housing hub (5) bottoms on sun gear shaft (7). 4. Install clutch plates (9) and (3) into direct clutch housing (4) starting with a steel clutch plate (9), then alternating composition clutch plates (3) and steel clutch plates (9). 5. Install direct clutch backing plate (2) in direct clutch housing (4) with snapring (1). 17-13. TRANSMISSION ASSEMBLY FROM SUBASSEMBLIES (3L80) (Cont'd) g. Direct Clutch TM 9-2320-280-34 17-52