TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 793 of 1258
TM 9-2320-280-34 17 - 5. TRANSMISSION CASE REPAIR (Cont’d) 6. Inspect rear case bushing (4) for damage. If damaged, perform steps 7 through 9. 7. Working from rear of transmission case (3), use bushing remover and installer J21465-8 and driver handle to remove bushing (4) from transmission case (3). Discard bushing (4). 8. Working from front of transmission case (3), use driver handle, driver handle adapter J21465-13, bushing remover and installer J21465-8, and adapter ring J21465-9 to install bushing (4). Place bushing (4) on remover and installer with lube passage (7) on bushing (4) facing adapter ring. Install bushing (4) on transmission case (3) until adapter ring bottoms. 9. Working from rear of transmission case (3), use staking tool to stake bushing (4). Stake marks must be in bushing groove (6). 17-15