TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 787 of 1258
TM 9-2320-280-34 17 - 3. TRANSMISSION DISASSEMBLY INTO SUBASSEMBLIES (Cont’d) o. Intermediate Clutch 1. Remove snapring (11) from intermediate clutch backing plate (12) and case (2). 2. Remove backing plate (12), three composition clutch plates (13), and three steel clutch plates (14) from case (2). Discard composition clutch plates (13). p. Gear Unit 1. Using 3/8 in. 12-point socket, remove center support-to-case aligning bolt (18) from case (2). 2. Remove center support-to-case snapring (15) from case (2). 3. Using gear unit holding tool, slide hammer adapter, and slide hammer, remove center support and gear unit assembly (16) and rear case thrust washer (17) from case (2). Install thrust washer (17) on center support and gear unit assembly (16). 17-9