TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 770 of 1258
TM 9-2320-280-34 16 - 5. ARTIC HEATER EXHAUST PIPE REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP: Tools Manual References General mechanic's tool kit: TM 9-2320-280-24P automotive (Appendix G, Item 1) General Safety Instructions Materials/Parts Do not touch hot exhaust system with bare hands. Cotter pin (Appendix E, Item 10) Four rivets (Appendix E, Item 142) Maintenance Level Direct support Do not touch hot exhaust system components with bare hands. Severe injury will result. a. Removal 1. Remove cotter pin (2) and exhaust pipe (3) from exhaust diverter box (1). Discard cotter pin (2). NOTE For instructions on the replacement of rivets, refer to para. 22-7. 2. Remove four rivets (4) and exhaust pipe (3) from cowl (5). Discard rivets (4). b. Installation 1. Install exhaust pipe (3) on exhaust diverter box (1) with cotter pin (2). 2. Install exhaust pipe (3) on cowl (5) with four rivets (4). 16-5