TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 760 of 1258
TM 9-2320-280-34 15-4. 9,000 LB. WINCH REPAIR 21. Remove detent spacer (23), spring (22), and detent ball (21) from gear housing (17). 22. Remove clutch lever (20) and O-ring seal (19) from gear housing (17). Discard O-ring seal (19). 23. Remove two retaining rings (27) from gear housing (17). NOTE Intermediate ring gear will come out with 85-87 steel balls. Be careful to catch all 85-87 steel balls. 24. Remove intermediate ring gear (26) and 85-87 steel balls (28) from gear housing (17). 25. Remove input sun gear (25) and input gear carrier (24) from gear housing (17). 26. Remove intermediate gear carrier (29), output gear carrier (30), and output ring gear (16) from gear end drum support (4). 27. Remove gasket (31) from gear end drum support (4). Discard gasket (31). b. Cleaning CAUTION Do not clean brake assembly or damage to equipment may result. Clean all winch components in accordance with para. 2-13. 15-19