TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 757 of 1258
TM 9-2320-280-34 15-4. 9,000 LB. WINCH REPAIR This task covers: a. Disassembly c. Inspection b. Cleaning d. Assembly INITIAL SETUP: Applicable Models Materials/Parts M997A2, M1025A2, M1035A2, M1043A2 Coating compound (Appendix B, Item 11) M1045A2, M1097A2 Lubricating oil (Appendix B, Item 28) Aircraft grease (Appendix B, Item 20) Bushing grease (Appendix B, Item 22) Anaerobic pipe sealant (Appendix B, Item 49) Tools General mechanic's tool kit: Manual References automotive (Appendix G, Item 1) TM 9-2320-280-20 Special Tools TM 9-2320-280-24P Hex head driver, 5/32 in. (Appendix G, Item 117) Equipment Condition Materials/Parts Winch removed (TM 9-2320-280-20). O-ring seal (Appendix E, Item 102) Gasket (Appendix E, Item 20) Two gaskets (Appendix E, Item 21) Maintenance Level Lockwasher (Appendix E, Item 81) Direct support a. Disassembly NOTE Tag leads for assembly. 1. Remove two screws (2), clamps (1), and leads 6Sc (3) and 7C (4) from motor end drum support (8) and , gear end drum support (9). 2. Remove three screws (5) and motor control cover (6) from control (7). 15-16