TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 754 of 1258
TM 9-2320-280-34 15-3. 6,000 LB. WINCH REPAIR 15. Assemble gasket (8) and coupling (19) on motor (21) and install on drum support (15), ensuring to align reference marks. 16. Install motor (21) on drum support (15) with ten socket head screws (20). Using hex head driver, tighten screws (20) to 35 lb-in. (4 N.m). NOTE If motor or control have been pre-coated with sealing compound, remove compound from between motor case and control mounting gear contact area. Failure to do so may cause improper grounding of control. 17. Install clamp (18) on motor (21). 18. Install control (17) on motor (21). 15-13