TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 748 of 1258
TM 9-2320-280-34 15-3. 6,000 LB. WINCH REPAIR b. Cleaning CAUTION Do not clean brake assembly or damage to equipment may result. Clean all winch components except brake assembly (7) in accordance with para. 2-13. c. Inspection NOTE For general inspection instructions, refer to para. 2-14. 1. Inspect drum (4) for damage to splined end (14), flanges (15), and tube (16). Replace winch if damaged. 2. Inspect drum supports (2) for damage. Replace winch if damaged. 3. Remove bushing (12) from drum support (2). 4. Inspect oil seal (13) for damage. Perform steps 5 through 7 if seal (13) is damaged, if not, go to step 8. 5. Remove seal (13) from drum support (2). 6. Inspect sealing surface (17) of drum support (2) for damage. Replace winch if damaged. 7. Install seal (13) into drum support (2). 8. Inspect bushing (12) for damage. Replace if damaged. Install bushing (12) in drum support (2). 9. Repeat steps 3 through 8 for other drum support. 15-7