TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 747 of 1258
15-3. 6,000 LB. WINCH REPAIR (Cont’d) NOTE Perform step 19 for vehicles with old configuration only. 19. Remove splined drive (10) and retaining ring (11) from drive shaft (8). Remove retaining ring (11) from splined drive (10). 20. Remove three locknuts (1) and drum support (2) from tie rods (9). Remove thrust bushing (3) from drum (4). Discard locknuts (1). 21. Remove drum (4) and thrust bushing (3) from drum support (6). 22. Push drive shaft (8) and brake assembly (7) out of drum (4). 23. Remove three locknuts (5) and tie rods (9) from drum support (6). Discard locknuts. TM 9-2320-280-34 15-6 Change 1 OLD CONGURATION