TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 746 of 1258
12. Mark drum support (3), ring gear (9), and end housing (10) for assembly. 13. Remove ten socket head screws (8), end housing (10), ring gear (9), and gasket (4) from drum support (3). Discard gasket (4). 15-3. 6,000 LB. WINCH REPAIR (Cont’d) 14. Remove ring gear (9) and gasket (4) from end housing (10). Discard gasket (4). 15. Remove stage three gear carrier (16) and thrust bushing (15) from end housing (10). 16. Remove set screw (17), spring (18), and ball (19) from end housing (10). 17. Remove clutch lever (20) and O-ring seal (21) from end housing (10). Discard O-ring seal (21). 18. Remove stage two gear carrier (14), stage one gear carrier (13), stage one sun gear (12), and clutch ring gear (11) from end housing (10). TM 9-2320-280-34 Change 1 15-5 NEW CONFIGURATION