TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 743 of 1258
TM 9-2320-280-34 15-2 Change 1 15-3. 6,000 LB. WINCH REPAIR This task covers: a. Disassembly c. Inspection b. Cleaning d. Assembly a. Disassembly 1. Remove two screws (1) and clamps (8) securing leads 6C (2) and 7C (3) to drum supports (7). 2. Remove screw (4), ground wire (4.1), and cover (5) from control (6). NOTE Tag leads for assembly. INITIAL SETUP: Applicable Models _______________ All models equipped with 6,000 lb. winch. Tools ____ General mechanic's tool kit: automotive (Appendix G, Item 1) Special Tools __________ Hex head driver, 5/32 in. (Appendix G, Item 117) Materials/Parts _____________ O-ring seal (Appendix E, Item 102) Three gaskets (Appendix E, Item 20) Lockwasher (Appendix E, Item 81) Six locknuts (Appendix E, Item 48) Materials/Parts (Cont'd) ____________________ Coating compound (Appendix B, Item 11) Aircraft grease (Appendix B, Item 20) Bushing grease (Appendix B, Item 22) Anaerobic pipe sealant (Appendix B, Item 49) Manual References ________________ TM 9-2320-280-20 TM 9-2320-280-24P Equipment Condition _________________ Winch removed (TM 9-2320-280-20). Maintenance Level _______________ Direct support