TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 740 of 1258
TM 9-2320-280-34 14 - 28 . AMBULANCE WINDSHIELD REPLACEMENT (Cont’d) 12. Install three hinge pins (3) in lower hinges (4) and front hinges (2) with three hitch pins (1). 13. Install two washers (6) and capscrews (5) securing front of body (7) to cargo floor (8). Tighten capscrews (5) to 60 lb-ft (81 N.m). NOTE Perform steps 14 and 15 for M996 and M996A1 only. 14. Connect heater fuel line (10) to shut-off valve (9). 15. Open heater fuel shut-off valve (9) at heater fuel line (10). 16. Install three clamps (14) on intercom cable (17), and antenna cables (16) on windshield (13) with three screws (15). 17. Install shims (18) between rear windshield mounting brackets (19) and windshield (13) as required to fill gap. 18. Secure two rear windshield mounting brackets (19) on windshield (13) with six washers (20) and capscrews (21). Tighten capscrews (21) to 15 lb-ft (20 N.m). 14-140