TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 732 of 1258
TM 9-2320-280-34 14 - 27 . AIR CONDITIONING COMPRESSOR REPAIR (Cont’d) CAUTION Do not scratch seal housing with O-ring hook. 9. Coat O-ring (2) with refrigerant oil. Using 0-ring hook, install O-ring (2) into seal housing (4) groove. Do not scratch seal housing (4) surface with O-ring hook. / 10. Coat seal retainer (1) with refrigerant oil. Using tongs, install seal retainer (1) in seal housing (4) and press lightly against seal. 11. Using snapring pliers, install snapring (7) in seal housing (4) with beveled edge of snapring (7) facing away from seal retainer (1). NOTE The air gap is determined by the spacer shims. When installing the original or a new clutch assembly, try the original shims first. When installing a clutch on a new compressor assembly, use 0.040 (1 mm), 0.20 (.51 mm), and 0.005 in. (.13 mm) shims from clutch accessory kit. 0.21 12. Install clutch spacer shims (6) on shaft (3). 13. Install felt ring assembly (5) into seal housing (4) and tap in place with plastic-faced hammer. 14-132