TM-9-2320-280-34 HMMWV Direct Support & General Support Maintenance Manual Download
Page 726 of 1258
TM 9-2320-280-34 14-27. AIR-CONDITIONING COMPRESSOR REPAIR (Cont'd) 8. Place puller jaws into rotor pulley (3) around shaft (4). 9. Insert the bottom lips of the jaws into the internal bearing snapring groove on rotor pulley (3). Place puller shaft protector between jaws, and seat on shaft (4). Install clutch plate puller on puller jaws and tighten capscrews finger tight. 10. Remove rotor pulley (3) from shaft (4). 11. Remove screw (9) and clamp (1) securing field coil lead wires (8) to compressor cylinder housing (7) and remove field coil lead wire (8) from clamp (1). 12. Using external snapring pliers, remove snapring (2) from seal housing (5) and remove field coil (6). Discard snapring (2). 14-126